Buy Now! Free shipping worldwide! Now on purchases just over £ 55!
'One Day Delivery' over the European Union. 48-72 hours worldwide!
Chip CR-3 Fiat Multipla 1.9 JTD 115BHP
1. CONDITION: NEW
2. TYPE: DIGITAL
3. USE: DIESEL ENGINES WITH COMMON RAIL SYSTEM
4. IN THE KIT: CHIP, WARRANTY CARD, 7 SETS OF CABLES WITH PLUG AND PLAY CONNECTORS, DETAILED MOUNTING INSTRUCTION, CD WITH THE SOFTWARE AND PROGRAMMER
5. WARRANTY: 24 MONTHS FROM THE DATE OF PURCHASE
- Adds more power to the engine, from 30 to 50BHP - the increase in power depends on the capacity and the initial power of the engine.
- Car reaches higher maximum speed, better acceleration, better dynamics and responds better for the gas pedal.
- In diesel engines decreases fuel consumption by 0,5 to 1,5 liter per 100KM.
- Eliminates so called "turbo hole" in cars with turbine.
- The electronic circuit of the chip is flooded with epoxy resin, waterproof, perfectly protected from moisture, dust, oily coating.
- Chip does not crash, is resistant to dirt or moisture which can cause damage to the device.
- It has a motor protection function (this function prevents overheating of the engine under heavy load - a very dynamic driving).
- Digital chip is made from good quality materials, and the wires are placed in the heat-resistant ducts.
- With the "plug and play" connectors the mounting is easy and takes only a few minutes (there are cars where the plug is located behind the engine or in the other hard to reach places that require more time to assemble, and sometimes you may need help of a mechanic, for example, because you have to remove the battery or air filter to get to the plug, but it's really a rare situation).
- After removing the chip the car returns to factory settings.
- Chip "CR3" has a very powerful processor and rewritable flash memory.
- It has the ability to multi-programming, adjusting, deleting, and for adding a combination of settings you prefer - thanks to that you can perfectly adjust the chip to your car and driving style.
- Chip is programmed individually for specified car or customer requirements, which gives you a best fit device and the possibility of re-programming on your own - no need to send device to our company. You can do the programming by yourself.
- The kit includes programmer and a CD with a software and a set of wires, so we can program the chip for any diesel engine with common rail injection system which means virtually any diesel powered vehicle, manufactured after 2001.
- The fact that you can change the settings allows you to program the chip differently from time to time - depending on how you want to drive - dynamically or on a long route (more economical). If you make any other modifications to the engine, you can also customize the chip to them - it is one of the best solutions available on the market.
AFTER PURCHASE PLEASE LET US KNOW:
- THE MAKE
- THE MODEL
- THE CAPACITY OF THE ENGINE
- THE YEAR OF PRODUCTION
- THE POWER IN BHP